In accordance with §11 PAngV (German ordinance regulating the indication of Prices), the last offer price shows the lowest price of the last 30 days after all usual direct discount deductions. Discounts such as cashback or trade-in, which are calculated or paid out after the purchase or by third parties without a contractual relationship with Hifi Foto Koch GmbH (service providers, agencies, manufacturers, etc.) or which require further action, are not included.
Do you want to increase your creativity? Combine the Ikan Beholder DS2-A with a lightweight monopod. Take your 3-axis gimbal to a whole new level. Mounting the gimbal on the MPA70 monopod increases stability. No jib to hand? No problem. By adding the monopod to the Ikan Beholder, you can take jib-style shots in seconds without additional accessories or complicated setups.
Drone-style footage
Film under trees in the style of a drone by raising your Ikan Beholder with the MPA70 monopod. Give your footage the perspective of a drone without the risks of flight and record audio without the loud propeller noise.
Strength meets portability
Made of aluminum and weighing only 730 grams, the monopod is sturdy yet lightweight.
Twist lock
The MPA70 can be extended in 5 sections. Each section has a twist lock button for quick height adjustments.
Rotateand attach
The base of the monopod contains a 1/4"-20 screw that can be rotated when a 3/8"-16 connection is required.
Ikan DS2-A Beholder 3-axis gimbal stabilizer
The DS2-A is specially designed for professional filmmakers who are looking for a hand-held stabilizer for a large number of small cameras weighing up to 1.8 kilograms. The DS2-A features an angled roll motor arm that provides a better view of the camera's display while the gimbal is active. A new feature of the DS2-A is the auto-sweep mode. With this mode, a 60 second camera movement can be programmed. The Beholder DS2-A is lightweight, easy to use and can be carried in any camera bag. In addition, the versatile DS2 can be used with DSLR, mirrorless and GoPro cameras as well as smartphones.
Angled motor arm
The DS2-A is the first Ikan Beholder gimbal to be equipped with an angled rolling motor arm. The angle gives the user a better view of the camera display. This makes it easier to frame shots and follow the action.
360-degree motor
The DS2-A has a brushless motor that can rotate 360 degrees for greater freedom of movement.
Designed for DSLR and mirrorless cameras
The DS2-A can stabilize a wide range of popular DSLR and mirrorless cameras with a maximum weight of up to 1.8 kilograms, such as the Canon 5D Mark IV, Canon 6D, Canon 7D, Sony a6300, Sony a7SII, Panasonic GH5. A GoPro or smartphone can also be used.
Advanced stabilization
The DS2-A uses a 32-bit controller, 12-bit encoder and an adaptive PID algorithm to stabilize reliably and efficiently. As a result, the gimbal reacts faster and stabilizes more easily, with longer operating times.
Lock mode
In lock mode, the roll, pitch and yaw axes work together to point the camera in one direction. The image section remains the same regardless of how the handle is moved.
Automatic inversion
Switch to inverted mode at any time by simply turning the handle upwards over the camera. Reverse mode can be used in conjunction with Lock and Follow modes.
Multiple follow modes
The DS2-A has three different follow modes. In yaw axis mode, the DS2-A only follows panning movements. In pitch and yaw mode, the DS2-A follows pan and tilt movements. The 3-axis follow mode allows full control of the pan, tilt and roll axes.
60 seconds programmed movement
The DS2-A allows a programmed movement of 60 seconds duration. Position the camera at the end point and then press the mode button five times. Then position the camera at the start point. The camera moves from the start point to the end point within the 60 seconds.
OLED status display
A display on the back of the handle shows information about the battery life and operating mode.
Easy balancing
With the newly developed quick-release plate, the DS2-A can be balanced easily and without tools.
Versatile mounting options
The DS2 handle has two 1/4-20 connections that are perfect for mounting accessories such as a light, microphone or monitor. A 3/8-16 threaded hole on the underside enables secure attachment to a tripod, jib or dual grip system such as the Ikan DGH.
Do you want to increase your creativity? Combine the Ikan Beholder DS2-A with a lightweight monopod. Take your 3-axis gimbal to a whole new level. Mounting the gimbal on the MPA70 monopod increases stability. No jib to hand? No problem. By adding the monopod to the Ikan Beholder, you can take jib-style shots in seconds without additional accessories or complicated setups.
Drone-style footage
Film under trees in the style of a drone by raising your Ikan Beholder with the MPA70 monopod. Give your footage the perspective of a drone without the risks of flight and record audio without the loud propeller noise.
Strength meets portability
Made of aluminum and weighing only 730 grams, the monopod is sturdy yet lightweight.
Twist lock
The MPA70 can be extended in 5 sections. Each section has a twist lock button for quick height adjustments.
Rotateand attach
The base of the monopod contains a 1/4"-20 screw that can be rotated when a 3/8"-16 connection is required.
Ikan DS2-A Beholder 3-axis gimbal stabilizer
The DS2-A is specially designed for professional filmmakers who are looking for a hand-held stabilizer for a large number of small cameras weighing up to 1.8 kilograms. The DS2-A features an angled roll motor arm that provides a better view of the camera's display while the gimbal is active. A new feature of the DS2-A is the auto-sweep mode. With this mode, a 60 second camera movement can be programmed. The Beholder DS2-A is lightweight, easy to use and can be carried in any camera bag. In addition, the versatile DS2 can be used with DSLR, mirrorless and GoPro cameras as well as smartphones.
Angled motor arm
The DS2-A is the first Ikan Beholder gimbal to be equipped with an angled rolling motor arm. The angle gives the user a better view of the camera display. This makes it easier to frame shots and follow the action.
360-degree motor
The DS2-A has a brushless motor that can rotate 360 degrees for greater freedom of movement.
Designed for DSLR and mirrorless cameras
The DS2-A can stabilize a wide range of popular DSLR and mirrorless cameras with a maximum weight of up to 1.8 kilograms, such as the Canon 5D Mark IV, Canon 6D, Canon 7D, Sony a6300, Sony a7SII, Panasonic GH5. A GoPro or smartphone can also be used.
Advanced stabilization
The DS2-A uses a 32-bit controller, 12-bit encoder and an adaptive PID algorithm to stabilize reliably and efficiently. As a result, the gimbal reacts faster and stabilizes more easily, with longer operating times.
Lock mode
In lock mode, the roll, pitch and yaw axes work together to point the camera in one direction. The image section remains the same regardless of how the handle is moved.
Automatic inversion
Switch to inverted mode at any time by simply turning the handle upwards over the camera. Reverse mode can be used in conjunction with Lock and Follow modes.
Multiple follow modes
The DS2-A has three different follow modes. In yaw axis mode, the DS2-A only follows panning movements. In pitch and yaw mode, the DS2-A follows pan and tilt movements. The 3-axis follow mode allows full control of the pan, tilt and roll axes.
60 seconds programmed movement
The DS2-A allows a programmed movement of 60 seconds duration. Position the camera at the end point and then press the mode button five times. Then position the camera at the start point. The camera moves from the start point to the end point within the 60 seconds.
OLED status display
A display on the back of the handle shows information about the battery life and operating mode.
Easy balancing
With the newly developed quick-release plate, the DS2-A can be balanced easily and without tools.
Versatile mounting options
The DS2 handle has two 1/4-20 connections that are perfect for mounting accessories such as a light, microphone or monitor. A 3/8-16 threaded hole on the underside enables secure attachment to a tripod, jib or dual grip system such as the Ikan DGH.
When creating your customer opinion and/or uploading media (e.g. images, videos, audio files, texts, documents, etc.), please observe our guidelines:
Each customer opinion is editorially checked before publication. Please ensure, among other things, that
By submitting your customer opinion and/or uploading media, you agree to these guidelines and terms of use.
These terms of use apply to the participation in and use of the customer ratings of Hifi Foto Koch GmbH. In the event of conflicts with the general terms and conditions or data protection regulations, these terms of use shall take precedence.
By submitting a customer rating and/or an upload of media (e.g. pictures, videos, audio files, texts, documents etc.) you assure that
You provide your content free of charge and are not entitled to any form of remuneration or compensation. There is no entitlement to publication.
Submitted customer opinions and uploaded media are usually reviewed and published within a few working days. All transferable rights of use of the content provided by you are transferred to Hifi Foto Koch GmbH and its current or future partners and representatives (including but not limited to affiliated companies, service providers, search engines, employees, agencies, branches, joint ventures, suppliers). The content may be used, modified and published by the aforementioned parties at their own discretion without any restrictions in terms of time, content and location. Promotional use is also permitted. The content may be edited or deleted if it violates the guidelines for ratings and community media as well as these terms of use or if it makes sense for the respective purpose. It is also possible to shorten the content at any time and without giving reasons.
Hifi Foto Koch GmbH and its current or future partners and agents do not warrant the ability to modify or delete the content you submit, should you wish to do so.
You transfer the rights and licence of your content to Hifi Foto Koch GmbH and its current or future partners and representatives. You grant Hifi Foto Koch GmbH and its current or future partners and representatives, the unrestricted right to your customer opinion (rating text, nickname, star rating, recommendation, etc.) as well as to your media (e.g. images, videos, audio files, texts, documents, etc.; incl. the indication of the author, description, etc.) to use, change, store, delete, shorten, modify, adapt, translate, copy, pass on, sell and distribute worldwide in any form, any medium, in any technology. Personal data (e-mail address, address, contact details) will not be passed on to third parties.
You assume full responsibility for your content. You agree to indemnify Hifi Foto Koch GmbH and its current or future affiliates and agents for all costs, including attorneys' fees, any damages, consequential damages of any kind, claims and demands arising from your failure to comply with the Review and Community Media Guidelines and these Terms of Use.
By submitting your customer opinion and/or uploading media, you agree to the Review and Community Media Guidelines and Terms of Use. By providing your email address, you agree that Hifi Foto Koch GmbH and its current or future partners and agents may send you status information of your customer opinion by email.
Data protection notice
When using the homepage including the submission of ratings and the upload of media, so-called personal data is processed by HiFi Foto Koch GmbH in the sense of Article 6 paragraph 1 DSGVO. Personal data is information that can be directly or indirectly assigned to you or can be assigned to you. In addition to the information entered by you, such as the name, e-mail and description, this data can also be data related to your customer account, IP addresses, access times, accessed URL, sources, browsers used, operating systems and devices, the name of your access provider as well as others. A full overview of data processing and privacy information can be found at https://www.fotokoch.ie/privacy.html.